Walsh Engineering Supplies, Ireland, Abrasives & Workshop Tools - leading suppliers > Plasma Cutting > Kjellberg Cutline 40G Plasma Cutting Machine

with air cooled plasma torch PHT-51 G/L and
for plasma gas air.
Excellently suitable in crafts, in small and medium-size companies and training centres, for repairs and on construction sites.

Suitable for straight, profile, template and bevel cutting in all positions, for piercing, for hole and slot cutting.

High cutting performance:

Safe pilot-arc ignition by high-voltage impulses.
Running cutting start and running piercing possible, no reference point necessary!
Automatic power increase of the pilot arc at workpiece contact.
Soft start circuit at cutting start and piercing increases the life time of nozzles and cathodes.
Excellent cutting quality, small kerfes, low material loss
Technologies: cutting with spacer spring, contact cap, bevelling cap or extended consumables for cuttingat inaccessible parts of workpiece and gouging

High labour safety:

High labour safety by shock-proof with safety shut-down at cutting with hand torch.
Control of the plasma gas and the thermal load of the plasma cutting system.

Characteristics of CUTLINE 40G:

2 cutting current steps: 60 and 120 A
Display of stand-by, plasma arc ON and fault
Plasma hand torch with central connector (length 6 m), provided with spacer spring
Oil and water separator as well as justification of plasma gas pressure by reducer/cleaner on rear wall
Transportation also by crane (4 crane hooks) or fork lift possible.

Optional accessories:

Circle cutting attachment for diameters from 100 to 1,000 mm, guide wheels included (not available separately)
Bevel cutting attachment, stepless adjustable
Consumable kit PHT-51 G/L

Plasma cutting and plasma gouging - two technologies with only one machine
Plasma gouging for preparation of welding seams, crack and inclusion removal, cast iron cleaning, surface removal and more.
The Kjellberg plasma torches can be reset from the version for plasma cutting to the application for plasma gouging and vice versa in a few seconds.
There need to be replaced nozzle and protection cap only.
With this concept a high availability of the system is guaranteed.

Compared to gouging with carbon electrodes, a host of technological advantages result, i.e.:

no heat effected zone of the material.
no grinding.
lower heat penetration and therefore lower warpage.
good observation of the process performance.
noise level and smoke accumulation reduction.

Mild steels are favourably treated with air as plasma gas. For high alloyed steels and aluminium are Ar/H2/N2/ mixtures to prefer and therefore an other Kjellberg plasma cutting machine.

Technical Data
Mains Voltage	3 x 400 V
Fuse, slow	35A
Mains Connection	24 kVA
Open Circuit Voltage	275 V (DC)
Cutting Current	60 - 120 A
Thickness - quality cut - maximum cut	up to 30mm (material depending) up to 40mm (material depending)
Plasma and cooling gas	Air
Pressure	0.5 MPa (5 bar)
Plasma Gas Consumption	205 l/min
Ignition	High Voltage
Ambient Temperature	- 10°C … + 40°C
Weight	28.5 kg
Dimensions (L x W x H)	820 x 490 x 880mm

COMPANY

About Us
Testimonials
Contact Us
Map

CUSTOMER SERVICES

EWM magazine
Delivery & Postage
Terms & Conditions
Returns Policy
Privacy Policy
Tools - Equipment

	Walsh Engineering have been supplying QPL with quality products for over 20 years. Their service and delivery is excellent.
	Paul Blake, Plant Manager	» More testimonials