Walsh Engineering Supplies, Ireland, Abrasives & Workshop Tools - leading suppliers > Welding > Welding Consumables > Electrodes > Hard Facing

A 5.8kg packet of 3.2mm E 6-UM-60 hardfacing electrodes from UTP. They are universally applicable for cladding on parts of steel, cast steel and high Mn-steel, subject simultaneously to abrasion, impact and compression. Typical application fields are the earth moving and stone treatment industry, e.g. excavator teeth, bucker knives, crusher jaws and cones, mill hammers etc., but also for cutting edges on cold cutting tools. The deposit is machinable by grinding only.

Hardness of pure weld deposit: 56 â€“ 58 HCR
After soft-annealing 780 -820Â°C / oven: approx. 25 HRC
After hardening 1000 â€“ 1050Â°C / oil: approx. 60 HRC
1 layer on high Mn-steel: approx. 22 HRC
2 layers on high Mn-steel: approx. 40 HRC

Welding instruction:
Hold electrode as vertically as possible and with a short arc. Preheat heavy parts and high-tensile steels to 200- 300Â°C. On high Mn-steel, cold welding (max. 250Â°C) is recommended, if necessary, intermediate cooling. On parts tending to hardening cracks, a cushion layer with UTP 630 is welded. UTP 630 should also be used for welding cracks under hardfacings. If more than 3 â€“ 4 layers are needed, apply the softer electrodes UTP DUR 250 or UTP DUR 300 for build-up. Re-dry electrodes that have got damp for 2h / 300Â°C.

Customers who bought this product also purchased

Esab Origo Tech Auto Darkening Welding Shield

€118.50 €95.00

COMPANY

About Us
Testimonials
Blog
Contact Us
Map

CUSTOMER SERVICES

EWM magazine
Delivery & Postage
Terms & Conditions
Returns Policy
Privacy Policy
Tools - Equipment

	"Glenfield Engineering have been dealing with Walsh Engineering Supplies for many years now. We find their prices highly competitive and the majority of our orders are completed from stock. The staff are knowledgeable and courteous and only quality ...
	Shane O' Brien, Purchasing Manager	» More testimonials